1. The equipment should be operated by designated personnel, and others are not allowed to use it without training.
2. Check whether all parts are normal and fasteners are firm before driving.
3. It is prohibited to cut unannealed steel parts, cast iron parts, soft metal parts, excessively thin workpieces, workpieces with a length less than 100mm, and workpieces exceeding the length of the scissors.
4. During operation, the human body should not approach the transmission part and blade of the equipment, and attention should be paid to the safety of surrounding personnel to prevent material from lifting and injuring people. When cutting, the material should be cut as close as possible to the inside of the knife. When the material is short, it is not allowed to use handheld workpieces for feeding, but clamp feeding should be used.
5. During the operation of the equipment, operators are not allowed to leave their positions without authorization. When the work is completed or temporarily left, the power should be cut off. At the same time, the machine is not allowed to be repaired or touched by hands during operation. It is strictly prohibited to press materials inside the material box with hands or feet.
6. Each lubrication point of the machine should be filled with lubricating oil at least once per shift as required.
Room 301, Building 2, No. 2 Huangyong Industrial Road, Zhongtang Town, Dongguan City, Guangdong Province
