When using a multimeter to measure the line, the main purpose is to check whether there is any damage to the line. You just need to unscrew the BNC head and use a multimeter to set it to the on/off position. One end is connected to the middle signal core
1、 Due to the different characteristics of each antioxidant and the varying aging properties of different rubber formulations. Therefore, the most effective antioxidant for one rubber material may be ineffective or even harmful for another rubber material.
Compare the measured electricity or electrical parameters with electrical standards or provide accurate proportional measuring instruments. A large number of measuring instruments (abbreviated as comparative measuring instruments) used in scientific research, quantity transfer, and industrial testing are all electrical measuring instruments.
There are two types of multimeter: mechanical meter and digital meter. 1. Measuring capacitance: measuring capacitance is mainly to measure whether the impulse discharge is good or bad, adjust it to the ohm gear, and then use two probes to connect its two legs respectively.
Total:5
Total pages:1 |
Current page:1
9The first page
7Previous
Next8
The last page:
Jump:
